With four slitters on site at our Butler facility, we are experienced processors of hot rolled, cold rolled, and coated steel. We can cut to a wide range of sizes and specifications. Our respective slitting line capabilities are listed below.
Slitting
Slitter 1: 60” x .028 – .130″
Gauge Min/Max:
.028 / .130
Exit ID:
20″/ 24″
Entry Width Min/Max:
3.00″ / 60″
Coil Weight Max:
44,000 lbs
Exit Width Min/Max
1.50″ / 59.50″
Min Setup Trim:
.500″
Entry/Exit OD Min/Max:
30″ Min / 73″ Max
Standard Width Tol:
+/- .005″
Entry ID:
20″ / 24″
Max Yield Strength:
60,000
Slitter 2: 60” x .040 – .180”
Gauge Min/Max:
.040 / .180
Exit ID:
20″ / 24″
Entry Width Min/Max:
12″ / 60″
Coil Weight Max:
50,000 lbs
Exit Width Min/Max:
1.750″ / 60.00″
Min Setup Trim:
.500″
Entry/Exit OD Min/Max:
28″ Min / 72″ Max
Standard Width Tol:
+/- .005″
Entry ID:
20″ / 24″ / 29″
Max Yield Strength:
60,000
Slitter 3: 68” x .055” – .250”
Gauge Min/Max:
.055 / .250
Exit ID:
24″
Entry Width Min/Max:
36″ / 68″
Coil Weight Max:
60,000 lbs
Exit Width Min/Max:
2.00″ / 67.25″
Min Setup Trim:
0.750″
Entry/Exit OD Min/Max:
36″ Min / 76″ Max
Standard Width Tol:
+/- .005″
Entry ID:
24″ / 29″
Max Yield Strength:
80,000
Slitter 4: 72″ x .040 – .250″
Gauge Min/Max:
.040″ /.250″
Exit ID:
20″ / 24″
Entry Width Min/Max:
10″ / 72″
Coil Weight Max:
60,000 lbs
Exit Width Min/Max:
2″ / 72″
Min Setup Trim:
.750″
Entry/Exit OD Min/Max:
36″ / 84″
Standard Width Tol:
+/- .005″
Entry ID:
20″-24″ and 28″-32″ ranges
Max Yield Strength:
150,000 psi max
Cut-to-Length
With Shape Correction Capabilities
Our CTL line offers corrective leveling, providing a flat sheet product suitable for a wide range of applications. View our cut-to-length line specs below.
Sheeting and Leveling Capabilities
Gauge Min/Max:
.054 / .500 Mild Grades
.054 / .500 High Strength
Entry Weight Max:
60,000 lbs Max Coil
Exit Width Min/Max:
24″ / 72″
Lift Weight Max:
10,000 lbs
Length Min/Max:
.054 / .149 — 24″ Min / 240″ Max
.150 / .169 — 24″ Min / 350″ Max
.170 / .500 — 24″ Min / 480″ Max
Lift Height Max:
33″
Entry OD Min/Max:
25″ Min / 72″ Max
Standard Tolerance:
Length +.500 / -0.000
Entry ID:
20″ / 24″ / 29″
Max Yield Strength:
70,000